Vatech Perfit FS Fully Sintered Zirconia

$145.05$174.07

Each box contains 5 blocks

$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$145.05
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$157.14
$174.07
$174.07
$174.07
$174.07
$174.07
$174.07
$174.07
$174.07
$174.07

Description

For use in Roland 42W or (Coming soon) DOF Craft 5x
Perfit FSTM
Perfect chairside zirconia solution for One-Visit prosthesis

Perfit FS is the most natural-looking restoration with a flexural strength of >500 MPa. It does not require a finding process, so save valuable time and focus more on patients.

Perfit_1

High flexural strength with >500 MPa

Perfit FS has superior flexural strength compared to competitors’ chairside blocks

Esthetic translucency without compromising strength

Enhance your patient’s confidence with industry-leading beauty

No oven time enables One-Visit prosthesis

Focus more on patients by saving chair time

Less chipping and tooth crack

Significantly low probability of chipping during mill-process / tooth crack during oral mastication.

33% reduced tooth preparation

Perfit FS requires less tooth preparation than other glass ceramics that require extensive preparation.

 

 

White Blocks

Perfit_1

Usage: Crown, Inlay, Bridge
Flexural Strength (MPa) 1): >500
Translucency(%) 2): >59
Translucency(%) 3): >40
Toughness(MPam1/2): 7.0
Hardness(GPa): 8.5
Shade: White
Size(L X W X H mm): C14(18 X 14.5 X 12.4) / C16(18 X 15.9 X 17.8) /

I12(15.0 X 12.5 X 10.4) / B32(32 X 15.1 X 15.1)

1) 3-point flexural strength

2) 0.3 mm thickness, by Hazemeter,

2) 1.0 mm thickness, by Spectrophotometer

Shade Blocks

Perfit_1

Usage: Crown, Inlay, Bridge
Flexural Strength (MPa) 1): >500
Translucency(%) 2): >59
Translucency(%) 3): >40
Toughness(MPam1/2): 7.0
Hardness(GPa): 8.5
Shade: A1, A2, A3, A3.5, B2, C2
Size(L X W X H mm): C14(18 X 14.5 X 12.4) / C16(18 X 15.9 X 17.8) /

I12(15.0 X 12.5 X 10.4) / B32(32 X 15.1 X 15.1)

1) 3-point flexural strength

2) 0.3 mm thickness, by Hazemeter,

2) 1.0 mm thickness, by Spectrophotometer

Multi Blocks

Perfit_1

Usage: Crown, Inlay, Bridge
Flexural Strength (MPa) 1): >500
Translucency(%) 2): >59
Translucency(%) 3): >40
Toughness(MPam1/2): 7.0
Hardness(GPa): 8.5
Shade: A1, A2, A3, A3.4
Size(L X W X H mm): C14(18 X 14.5 X 12.4) / C16(18 X 15.9 X 17.8) / B32(32 X 15.1 X 15.1)

1) 3-point flexural strength

2) 0.3 mm thickness, by Hazemeter,

2) 1.0 mm thickness, by Spectrophotometer

Perfit_1

A majority of the competitors’ products are glass, and their flexural strength is 204 ~ 377MPa.
For doctors who truly care about their patients, zirconia is preferred over glass ceramic.

The flexural strength of Perfit FS is higher than that of glass ceramic, glass resin, or glass zirconia.
Often, glass ceramic products are at risk of fracture due to their flexural strength of only 200 to 400 MPa.

Thus, glass ceramic requires quite a bit of tooth preparation before prosthetic processing – about 1mm.

Perfit FS requires only a minimum preparation of 0.6mm, unlike glass ceramic. .
As a result, the preparation amount can be reduced by up to 33% compared to glass ceramic.

 

Clinical samples of Perfit FS after scanning, designing, milling and polishing
Buccal side image Lingual side image
Buccal side Lingual side
Before image After image
Before After

 

 

Vickers Fracture Toughness Test

 

Indentation behavior experiment using diamond indent

Indentation Load Force: 10kgf

 

Perfit FS

(Fully sintered zirconia)

Other Zirconia Disc

(3Y-TZP)

e.max CAD

(Glass ceramic)

 

In this experiment, the indentation length of Perfit FS is compared to that of 3Y-TZP,
a commercial sintered zirconia product that is already on the market, and e.max CAD,
when indentation load is applied with a 10 kg Vickers hardness tester.

Unlike the significant crack observed on both the 3Y-TZP zirconia disco and e.max CAD product,
there is no crack on the Perfit FS.

The results demonstrate that Perfit FS has a high fracture toughness, indicating that it is less prone to
chipping and cracking during milling or oral mastication than other products.

Perfit_1

Reviews

There are no reviews yet.

Be the first to review “Vatech Perfit FS Fully Sintered Zirconia”