These guys are the best. They provide so much help and insight with the Medit. I can't say enough great things about them and their continued support. I truly appreciate everything!! - 6/16/2020
Bob D
Just got my Medit i700 from CAD-Ray and experienced what everyone raves about, the level of customer service by CAD-Ray. As you know you can buy this scanner from a lot of places but they won't offer you help and support. They called my cell and conn...read moreJust got my Medit i700 from CAD-Ray and experienced what everyone raves about, the level of customer service by CAD-Ray. As you know you can buy this scanner from a lot of places but they won't offer you help and support. They called my cell and connected to my laptop and configured everything at 7 PM.. Great great experience.read less - 12/08/2021
Robert Crosby
The i700 is the second scanner I have purchased. It is hands down far superior in terms of quality and ease of use than my first scanner (3M Tru Def). I was hesitant to enter the market again but wanted to mainly for implant reasons. After talking...read moreThe i700 is the second scanner I have purchased. It is hands down far superior in terms of quality and ease of use than my first scanner (3M Tru Def). I was hesitant to enter the market again but wanted to mainly for implant reasons. After talking with Laura and watching her presentation with my staff, we were sold! The i700 was extremely reasonable in price while being similar to units costing twice as much. CAD-Ray made this possible. I found their on line training to be adequate in learning the necessary skills to start scanning, I continue to watch these videos as I sharpen my skills. Initially I was concerned about the on line training. But now I actually prefer this way of training as it is self paced and you always have the library of videos to watch when needed. Laura has been there to answer questions and help me whenever needed and I’m talking on nights and weekends too! I admit I was was extremely hesitant to get another scanner, especially with an online outfit; but I have no regrets and highly recommend CAD-Ray and Laura for anyone needing a scanner! They provide excellent services.read less - 4/23/2022
AJ Ganir
Cadray has great support and service! They are very responsive to questions. Love the new medit scanner! - 5/06/2021
David Blanco
Cad-Ray is great! Great customer service and they are consistent with their followthrough . Always helpful when you need questions answered and helping to lower the learning curve with newly purchased equipment. I’m very satisfied with my medit i-...read moreCad-Ray is great! Great customer service and they are consistent with their followthrough . Always helpful when you need questions answered and helping to lower the learning curve with newly purchased equipment. I’m very satisfied with my medit i-500 intraoral scanner. Armen and Frank are solid!read less - 6/16/2020
Madhavi Chavda
Still beginner to use IO scanner. best customer service. Live training was very useful. Andy Nova was great in improving my skill for scanning and showing me all features. Thank you. - 5/19/2022
Cad-ray has to be the best company to work with when it comes to digital dentistry solutions. Here are the reasons why:
1. Experience. Everyone in the company has extensive experience in dentistry. They have used all digital platforms and offer cust...read moreCad-ray has to be the best company to work with when it comes to digital dentistry solutions. Here are the reasons why:
1. Experience. Everyone in the company has extensive experience in dentistry. They have used all digital platforms and offer customers first hand experience.
2. Honesty. Based on their experience they share all the good/bad of different systems. They work with you to find a solution that works best for you. Not sell you the piece of the equipment that gives them the biggest commission.
3. Support. Cad-ray offers the missing piece of the dentist/digital manufacturer puzzle. Many other distributors sell you a piece of equipment but don’t have true day-to-day experience with that equipment. Cad-ray’s team openly share their expertise to help customers optimize their workflows with great technology.
4. Passion. The Cad-ray team is extremely passionate about their craft. They truly believe in what they have to offer.
I took Armen Mirzayan’s course on intraoral scanning and it was truly mind blowing. Armen’s insights will help any dentist optimize their craft. I purchased the full sprintray 3d printing ecosystem the help of Frank. I plan to purchase more equipment from cad-ray.
Also, Jesse is a genius in regards to all aspect of digital workflows. I’m truly grateful for this company and everyone who I’ve worked with so far.read less - 10/07/2022
Jose Morales
Service is extremely quick and on point. Highly recommended to join the Cad Ray facebook group! - 6/01/2022
Ted Fang
Purchased a Trios 5 and the Sprint Ray Printer/Ecosystem from Cad-Ray at the end of 2022. Frank Deluca, my CAD-Ray rep, was instrumental in helping me see the value in purchasing both technologies to expand on my digital dental office. He came ac...read morePurchased a Trios 5 and the Sprint Ray Printer/Ecosystem from Cad-Ray at the end of 2022. Frank Deluca, my CAD-Ray rep, was instrumental in helping me see the value in purchasing both technologies to expand on my digital dental office. He came across as being very sincere and professional throughout the entire process. After the purchase, he even made himself available to go above and beyond what a normal dental rep would do. For instance, when I had my Sprint Ray Ecosystem installed, he set aside time on a Friday afternoon to walk me through the steps to print my first 3D study models. I would say he is one of the best dental reps that I have come across. Definitely received a 5 star experience and service from Frank. He is definitely and asset to CAD-Ray.read less - 1/25/2023
Jeff Muszynski
Fantastic customer service - 6/19/2020
Debra Haselton DDS PLC
I had a training session with Laila this morning and she was fantastic! Very organized training, easy to follow and was able to get my scanner up and running. Thank you Kaila! - 1/06/2022
Michelle Duong
We are a new user of Medit i600. My rep Andy was very good with the training & very detailed & patient with the whole process. The online support is one of the best. Installation was also easy and straightforward. Our staff is really happy...read moreWe are a new user of Medit i600. My rep Andy was very good with the training & very detailed & patient with the whole process. The online support is one of the best. Installation was also easy and straightforward. Our staff is really happy with this new addition to our office. Thank youread less - 9/23/2022
I do not know if it is okay to use the F word on this page. But I F@#KING LOVE MY MEDIT with the new filters now.
Scan the teeth with the middle filter, then go to the first 1 and get the palate in less than 1 minute. AMAZING
I have since s...read moreI do not know if it is okay to use the F word on this page. But I F@#KING LOVE MY MEDIT with the new filters now.
Scan the teeth with the middle filter, then go to the first 1 and get the palate in less than 1 minute. AMAZING
I have since sold my ITERO and JUST HATE my OMNICAM EVERYDAY.read less - 3/01/2020
When I bought my first scanner a few years ago I was blown away by CAD-RAY’s support! They do a great job of getting you and your team ready to go with it. Frank D. has been a huge help with getting us confident with our scanners and making sure we a...read moreWhen I bought my first scanner a few years ago I was blown away by CAD-RAY’s support! They do a great job of getting you and your team ready to go with it. Frank D. has been a huge help with getting us confident with our scanners and making sure we are taken care of. He and his colleagues at CAD-RAY are always a responsive to our calls. Thank you!read less - 2/21/2023
Ed Borio
I was dragging my feet before purchasing my first scanner because I was apprehensive of the effort required to change to a digital workflow. Laura assured me my fears were overblown and because of her patience and exceptional training abilities it h...read moreI was dragging my feet before purchasing my first scanner because I was apprehensive of the effort required to change to a digital workflow. Laura assured me my fears were overblown and because of her patience and exceptional training abilities it has been a rewarding and relatively seamless transition to the world of scanning. I never dreamed implementation would have been this easy and its attributed to Laura's skillful training ability. The scanner is wonderful and powerful, but we would have never been able to unlock its potential without her assistance.read less - 5/07/2021
Matt McReynolds
These guys are ALWAYS there to help if you get stuck. I’ve been happy with the mill (coritec one) and scanner (i500) I bought from them 2 years ago. I’d do business with them again. - 7/01/2021
Melissa Poynter
Very pleased with Heather :) She has been able to solve any and all issues I may be having, and does so within the same day if not right away! - 6/16/2022
Steven Polasek
The cad ray team is the best! Jon and Nick offer first class service! I ordered a medit i500 from another supplier and had to cancel my order after it had not arrived within 3 weeks. Placed my order with Jon and Nick, had the scanner to me within 24 ...read moreThe cad ray team is the best! Jon and Nick offer first class service! I ordered a medit i500 from another supplier and had to cancel my order after it had not arrived within 3 weeks. Placed my order with Jon and Nick, had the scanner to me within 24 hours of purchase. I love my medit! Best scanner on the market!read less - 6/15/2020
This company is genuinely amazing. Amazingly good products, but the thing that sets them apart is the support. Frank and Sean have answered any questions I have unbelievably fast. And I LOVE the DOF Craft 5x milling unit. Learning the flow of same da...read moreThis company is genuinely amazing. Amazingly good products, but the thing that sets them apart is the support. Frank and Sean have answered any questions I have unbelievably fast. And I LOVE the DOF Craft 5x milling unit. Learning the flow of same day milling was tricky for me, but they held my hand the whole way. Can’t go wrong here.read less - 1/06/2024
Dennis Wong
Best support ever. They are super responsive when a problem occurred, and immediately set up a support ticket with the vendor who contacted me within the hour to help me to solve the problem. - 7/27/2023
Russell Schafer
Overall great company to work with. They sell wondeful products and give stellar service for a much lower price than any of the supply houses. I can't recommend them enough. - 8/19/2022
Rusty Fitton
Super happy with our purchase of the Medit i500 from Cad Ray. Overall its a work horse scanner that has handled anything weve thrown at it. The key to success with it is definitely taking the time to actually learn how to use it after purchase. Ca...read moreSuper happy with our purchase of the Medit i500 from Cad Ray. Overall its a work horse scanner that has handled anything weve thrown at it. The key to success with it is definitely taking the time to actually learn how to use it after purchase. Cad Ray has an immense library of straight forward education videos that are updated basically daily. I havent done the 2 day course but that is also included in the purchase. You really cant find that sort of service and education with any of the other scanners on the market. Id recommend them to anyone.read less - 6/26/2020
Carter Weber
I had a great experience with CAD RAY. I was lucky enough to have Frank DeLuca come down to my office to demo the Medit I700. Needless to say, we were in love with the technology and the great hands on demo. CAD RAY overnighted me the scanner and we ...read moreI had a great experience with CAD RAY. I was lucky enough to have Frank DeLuca come down to my office to demo the Medit I700. Needless to say, we were in love with the technology and the great hands on demo. CAD RAY overnighted me the scanner and we were off to the races. Any time we have had a technical question, Frank has personal helped me or put me in touch with one of his colleagues if he wasn’t available. All around, it was as 5 star experience!read less - 12/16/2021
Robin Thoman
Instant support, nice people at Cad-Ray but LOTS of trouble getting CIT 12m same-as-cash approval as offered. CIT fumbled around for 7d in finding credit report. Eventually fed up with inactivity or support after lifting Equifax credit freeze and d...read moreInstant support, nice people at Cad-Ray but LOTS of trouble getting CIT 12m same-as-cash approval as offered. CIT fumbled around for 7d in finding credit report. Eventually fed up with inactivity or support after lifting Equifax credit freeze and directed to Experian quagmire of automated phone calling tree.read less - 1/09/2021
Kayla Dobmeier
Customer service is truly the best I've seen. You don't just buy a product from them. There are hundreds of hours of training videos, and they have answered any question we have had in a matter of minutes. We are so glad we purchased our IO scanner t...read moreCustomer service is truly the best I've seen. You don't just buy a product from them. There are hundreds of hours of training videos, and they have answered any question we have had in a matter of minutes. We are so glad we purchased our IO scanner through them!read less - 4/09/2021
Jennifer Hastings
Andy was wonderful with setting everything up and explaining everything. The Medit i700 has been great thus far, easy set up! The only "issue" is that it can be occasionally glitchy. - 1/11/2022
Have been chatting with the CADRAY group for at least a year now even though I did not buy anything from them. They are very receptive, prompt and helpful. Finally bit the bullet and received my Medit yesterday! Now my Bluecam has a new buddy!! - 7/17/2020
Johnny Vredenburg III
Before working with cad-ray, I was hesitant to dive into digital dentistry due to the complexity of it. Working with Laura at cad-ray made all of my concerns go away. She was there to help me with my Exocad software installation, even outside of norm...read moreBefore working with cad-ray, I was hesitant to dive into digital dentistry due to the complexity of it. Working with Laura at cad-ray made all of my concerns go away. She was there to help me with my Exocad software installation, even outside of normal business hours - really hard to come by! I also purchased a Medit i500 and getting that setup and working in my clinic was seamless. I could not have asked for better support while navigating digital dentistry. My next purchase will be a 3D printer, and i know exactly where i will buy it from! Highly recommend these guys.read less - 11/20/2020
Yaqi Mu
I absolutely love using the Medit i500 Intra-oral scanner!!! The i500 scanner is small and easy to use on all patients. It is fast and gives a very clear image. I also think its very cool that you can change the music setting to whatever song you m...read moreI absolutely love using the Medit i500 Intra-oral scanner!!! The i500 scanner is small and easy to use on all patients. It is fast and gives a very clear image. I also think its very cool that you can change the music setting to whatever song you may like! I have used a few different scanners since i have been a dental assistant and have had several complications as far as: how long the scanner would take to load the image, The scanner not catching the image and even the system constantly kicking me out. With the i500 intra-oral scanner i have the BEST experience. I am happy and my patients are happier! I recommend the Medit i500 Intra-oral scanner to anyone who has never used it before! You wont be disappointed! 5 Stars for sure!!!!
- Samantha Brown @ Southern Oak Dental in Conway SC.read less - 6/17/2020
Just got my Medit IOS delivered last week and the service from Jon was great! I had a ton of questions before placing the order and he happily answered. This is the type of customer support many dental suppliers are missing. Great company to work wit...read moreJust got my Medit IOS delivered last week and the service from Jon was great! I had a ton of questions before placing the order and he happily answered. This is the type of customer support many dental suppliers are missing. Great company to work with.read less - 6/19/2020
Esther Quintana
Se ve muy bien, aunque yo le tengo, pánico, a los Dentistas, Sorry, pero tengo que ir, Ni modo - 2/25/2015
Artin Sakhaee
The support is even better then the camera itself. I used many other scanners and this is by far the best one. Recommended to many people. Looking to purchase a second one for my practice. The use and results are amazing. No adjustments to the p...read moreThe support is even better then the camera itself. I used many other scanners and this is by far the best one. Recommended to many people. Looking to purchase a second one for my practice. The use and results are amazing. No adjustments to the prosthetics at all.read less - 7/15/2020
Jay Arnold DMD
Loving my Medit i700. My crowns have never fit better, and scanning is SOO easy. I started with cad-ray with the i500. The training and support have been second to none. I upgraded to the i700 shortly after it came out, and recently had a warranty is...read moreLoving my Medit i700. My crowns have never fit better, and scanning is SOO easy. I started with cad-ray with the i500. The training and support have been second to none. I upgraded to the i700 shortly after it came out, and recently had a warranty issue with the new scanner. immediately after calling them with my problem. A new scanner was overnighted to my office, I was very pleased, and had minimal down time.read less - 4/05/2022
David Paquette
Cad-Ray has been super-efficient and very easy to work with! Highly recommend them for Medit sales and support! - 11/09/2021
Great support services and training from Cad-Ray, they are always very helpful and responsive. I have been using the I500 in my offices for the last two years and loving it. - 11/01/2021
A newcomer to scanning, I have been impressed with the ease of the process. The commitment shown by each CAD-Ray team member to successful customer training and their skill levelhave been extraordinary. Thank you Kaila, Frank and Andy!! - 5/15/2022
Rosemary Toczydlowski
I had a phone call with Frank from support today, and he was awesome! Very helpful and knowledgeable. He sorted out all our issues no problem. Thank you Frank!! - 6/09/2021
Thomas Lim
5 stars for a great product and great service. After much research I knew I was set on the Medit 500. I considered some of my local equipment reps, as well as cad-ray. Cad-ray won out due to their efficiency, speed of service, and knowledge. Their on...read more5 stars for a great product and great service. After much research I knew I was set on the Medit 500. I considered some of my local equipment reps, as well as cad-ray. Cad-ray won out due to their efficiency, speed of service, and knowledge. Their online presence makes it easy to get help via messaging, social media, or phone. The fact that one of the employees of Medit (an engineer?) posts on the cad-Ray Facebook group speaks volumes of the vendor-mfg relations.
The scanner itself works great, but make sure to contact them to get the minimum specs required for a laptop — it will make a difference in how the scanner performs. I had some slow scans at first but upgraded from 8gb to 32gb ram and also got some coaching from customer service (Frank) to get me up to speed.
To make the scanner mobile, I purchased this cart from Staples: https://www.staples.com/Oklahoma-Sound-Premium-Audio-Visual-Presentation-Cart-40-1-2-H-x-18-W-x-30-D-Black-Ivory-Wood/product_932437.
Lastly, I purchased “3M Dual Lock Fastener” to keep the power module attached to the wand from falling off the cart. I carry the scanner between two offices, so I wanted something sturdy, but removable. (see in photos). The hockey puck shaped holder (comes with the scanner) is heavy and sticks to the countertop without needing any adhesive.read less - 10/12/2019
I had been on the market for a scanner for a while and the i700 is my first intraoral scanner purchase. We are still new to the scanning world and its capabilities. Frank DeLuca was my main contact from the beginning and the person who did our traini...read moreI had been on the market for a scanner for a while and the i700 is my first intraoral scanner purchase. We are still new to the scanning world and its capabilities. Frank DeLuca was my main contact from the beginning and the person who did our training. The scanner is incredible and has surpassed our expectations even though we haven’t used it to its full potential yet. Frank has been amazing and always there to guide us every step of the way. Having such fabulous customer service and support from CAD-Ray was key for us when making this purchase decision. Thank you!read less - 6/23/2022
Ellen Huang
Armen created series of these very helpful videos. They helped us tremendously in breaking into the new scanner we purchased. No matter you just got into digital dentistry or you are quite experienced with different fields of data acquiring or treatm...read moreArmen created series of these very helpful videos. They helped us tremendously in breaking into the new scanner we purchased. No matter you just got into digital dentistry or you are quite experienced with different fields of data acquiring or treatment planning, you will find those being tremendous help.read less - 5/24/2020
It was very powerful and enlightening experience today to do 2 day sessions with Dr. Armen and Damien. I learned a lot, quite amazed by how much we can do with knowledge and Medit scanner. As usual great support by CAD-RAY always. I absolutely love M...read moreIt was very powerful and enlightening experience today to do 2 day sessions with Dr. Armen and Damien. I learned a lot, quite amazed by how much we can do with knowledge and Medit scanner. As usual great support by CAD-RAY always. I absolutely love Medit scanner.read less - 8/08/2021
Caleb King
Kaila Larson is the support specialist for our office and has been outstanding. She gets back to us quickly with any questions we have, and will log into the computer and fix issues so we don't even have to worry about them. She is extremely knowled...read moreKaila Larson is the support specialist for our office and has been outstanding. She gets back to us quickly with any questions we have, and will log into the computer and fix issues so we don't even have to worry about them. She is extremely knowledgeable about the MEDIT scanner and the supporting software. She responds to calls and texts or emails and will communicate with us in whatever way is most convenient for our office. She has saved us hours of time and headache by always being available to help.read less - 5/25/2022
Engy Hassan
Amazing customer service! Excellent on time feedback. Thank you Kaila - 12/08/2021
Cody Boseman
Cad-ray has been amazing, not to mention they have an amazing product in the medit i500. Their training is great, customer service is quick and thorough, and follow up is consistent. I highly recommend using cad-ray for anything that you may need. - 6/19/2020
Scott Chong
The i500 has been a game-changer for our orthodontic practice. Patients love not having to do alginate impressions. Records appointments and debands take much less time plus there's significantly less clean-up. And it's fast/easy enough to use tha...read moreThe i500 has been a game-changer for our orthodontic practice. Patients love not having to do alginate impressions. Records appointments and debands take much less time plus there's significantly less clean-up. And it's fast/easy enough to use that we've even been able to train summer interns to scans with zero prior dental experience. Our retainers, nightguards, and sleep apnea appliances all showed improved fit with less chair-side delivery time due to accuracy of the scans. Customer support is top-notch. Whenever we've had issues, we get someone immediately and they either talk us through a fix or login via screenshare to help us directly. They have a great loyalty program which gives significant discounts to upgrade to newer units. We recently took advantage and are excited to try out the new i700, especially since they're now Mac-compatible. Simple version: Great intra-oral scanner, easy to use/operate, intuitive software interface, fantastic support.read less - 8/16/2023
Asi Cohen
Armen Mirzayan's knowledge base sets CAD-RAY.COM apart from all other digital dental-equipment dealers. Not content with linking manufacturer support content, Armen's team provide instant feedback to any equipment queries, in-depth video tutorials, a...read moreArmen Mirzayan's knowledge base sets CAD-RAY.COM apart from all other digital dental-equipment dealers. Not content with linking manufacturer support content, Armen's team provide instant feedback to any equipment queries, in-depth video tutorials, and regular product testing, streamlining, and pushing the boundaries of their products - be it software, hardware, or connectivity between various brands. I highly recommend this team if you want to fully utilise your equipment and have the backup needed going forward!read less - 11/05/2019
Very great company, especially Frank. He is very helpful and has saved us a lot of money on resin for our 3D printers. We've recently bought a new scanner and Exocad software. He has been very gracious and quick to respond with the many questions I h...read moreVery great company, especially Frank. He is very helpful and has saved us a lot of money on resin for our 3D printers. We've recently bought a new scanner and Exocad software. He has been very gracious and quick to respond with the many questions I have had. Highly recommend Cad-Rayread less - 1/25/2023
Aaron Olson
This product is the best out there. Do the math and your ROI makes more sense than most products we purchase as dentists. Get on the digital train or you’ll be left behind. This is the best product to make the jump with. - 6/16/2020
The Medit i700 is a game changer in speed and overall comfort for patients. I find it much smaller than other brands and have done almost 50 appliances/aligner cases the past 2 months with no fit issues from my lab. Love this scanner!
Dr. Sherric...read moreThe Medit i700 is a game changer in speed and overall comfort for patients. I find it much smaller than other brands and have done almost 50 appliances/aligner cases the past 2 months with no fit issues from my lab. Love this scanner!
Dr. Sherrick
Auburn Lakes Orthodonticsread less - 8/24/2021