Purchasing my medit i700 from Cad-Ray was a great decision. I did my first training with Kaila and she was fantastic! Super knowledgeable, patient and truly helpful in making sure I was ready to hit the ground running with patient care. I put a call ...read morePurchasing my medit i700 from Cad-Ray was a great decision. I did my first training with Kaila and she was fantastic! Super knowledgeable, patient and truly helpful in making sure I was ready to hit the ground running with patient care. I put a call into cad-ray support in the middle of a case and sure enough Kaila was also the one to answer and handle the situation. She jumped right on my computer and had things fixed in a matter of a few minutes. Awesome support, great staff and overall super positive experience with Cad-ray thus far!read less - 5/06/2022
Laura
Very helpful and attentive when setting up my new Medit scanner. Seamless process from start to finish - 10/28/2024
Russell Schafer
Overall great company to work with. They sell wondeful products and give stellar service for a much lower price than any of the supply houses. I can't recommend them enough. - 8/19/2022
Ma. Teresa Santana
Best support and customer service ever! My scanner is long past warranty and they still answer all my questions. When it's time to upgrade I'll be buying from them again. A friend bought same scanner from another vendor and got zero support. I had to...read moreBest support and customer service ever! My scanner is long past warranty and they still answer all my questions. When it's time to upgrade I'll be buying from them again. A friend bought same scanner from another vendor and got zero support. I had to help them. Told her next time buy from Cad Rayread less - 5/10/2024
John Pisacane
I purchased my Medit scanner after the ADA meeting in 2018. I did it primarily on the personal recommendation of Armen Mirzayan, the owner of Cad-Ray. I have known Armen for over 15 years (we both were CEREC trainers) and he has always been unbeli...read moreI purchased my Medit scanner after the ADA meeting in 2018. I did it primarily on the personal recommendation of Armen Mirzayan, the owner of Cad-Ray. I have known Armen for over 15 years (we both were CEREC trainers) and he has always been unbelievably knowledgeable about dental technology and was always moving on the cutting edge.
When you see Armen's daily FB posts, it’s obvious that he is constantly pushing the envelope and exploring the limits of the Medit and the processes we use to idealize our push towards completely digital dentistry. Medit owners are fortunate to have Armen finding glitches and pushing for improvements in our scanner.
As far as after sale service, I can’t find a flaw with Cad-Ray. You won’t find a more supportive and dentist-centered company. Armen and Frank do everything to make purchasers happy and back up their sales.
I’ve heard of horror stories when people shopped elsewhere and only positive comments about Cad-Ray.
In summary, buy your Medit and other high tech equipment from Cad-Ray, you will be totally satisfied.
.read less - 10/08/2019
I purchased a Medit scanner in August and I am very happy with the scanner. I was trained on an Omnicam in dental school and used Omnicam for 4 years in my associateship. The speed and quality of the Medit scanner is comparable to a CEREC scanner but...read moreI purchased a Medit scanner in August and I am very happy with the scanner. I was trained on an Omnicam in dental school and used Omnicam for 4 years in my associateship. The speed and quality of the Medit scanner is comparable to a CEREC scanner but you can’t beat the price of the Medit! I would highly recommend this if you are a beginner or pro in digital dentistry!read less - 9/22/2020
Melissa Poynter
Very pleased with Heather :) She has been able to solve any and all issues I may be having, and does so within the same day if not right away! - 6/16/2022
Matt Stratman
only dental company that I have no complaints about - 11/03/2022
Evelyn Chan
Going with CAD-RAY and Laura is one of best investment I've made year 2020 ( I have MEDIT 500). Jumping into scanning is something that intimidated me since I am not a techie person and taking PVS impression is something second nature to me. Laur...read moreGoing with CAD-RAY and Laura is one of best investment I've made year 2020 ( I have MEDIT 500). Jumping into scanning is something that intimidated me since I am not a techie person and taking PVS impression is something second nature to me. Laura made everything a breeze, she is very accomodating and most importantly responds so fast, I never felt left out. Attending the level 1 course of Armen M. was awesome , learned the basics and it was taught in a way so easy to apply. Since my first scan, I never looked back, thinking to myself , I should have done this earlier. The crowns comes back with little to no adjustements which saves a lot of chair time. Cannot get better than this. Big shout out to CAD-RAY, Laura and Armenread less - 10/19/2021
I love my medit scanner. I purchase many dental equipments each year and by far it’s the best thing I got for the bucks I spent ( beating my 6 digits equipments ).
We have omnicam and I hated it, multiple crushes, expensive monthly service fee, hor...read moreI love my medit scanner. I purchase many dental equipments each year and by far it’s the best thing I got for the bucks I spent ( beating my 6 digits equipments ).
We have omnicam and I hated it, multiple crushes, expensive monthly service fee, horrible support, etc. I was so frustrated and had to look for an alternative. Many mentioned itero to me and I was about to purchase it and suck another monthly fee until I came by Armen’s video about medit on one of the Facebook group in 2018. I was surprised with the image and the speed and started digging more and contacted Frank to explain the scanner more. Ended purchasing it late 2018 and I’m a happy user Since after. The support is excellent, Frank is there when you need any help plus the Facebook community is there to answer anything. Recently, I attended Armen’s course to learn how to mill from the medit and I got shocked by the AI and the options that the software has. This machine is a beast and you won’t regret it getting it from Armen and Frank. They go beyond and not like other salesman or equipments where you are left behind after they sale you and finish their training. We are in 2020 and I still get the same support as I bought it in 2018.read less - 1/09/2020
Just got my Medit IOS delivered last week and the service from Jon was great! I had a ton of questions before placing the order and he happily answered. This is the type of customer support many dental suppliers are missing. Great company to work wit...read moreJust got my Medit IOS delivered last week and the service from Jon was great! I had a ton of questions before placing the order and he happily answered. This is the type of customer support many dental suppliers are missing. Great company to work with.read less - 6/23/2020
Harrison MacKenzie
Purchased Medit i700 from Frank/CAD-Ray and everything has been absolutely top-notch! Great service, quick responses, great training. Very happy with CAD-Ray and our i700! - 10/20/2022
Jamal
I recently made a purchase from Cad-Ray and the experience was truly outstanding. From my initial enquiry, Nick was incredibly supportive and knowledgeable, answering all of my questions thoroughly and guiding me to the product that would best meet m...read moreI recently made a purchase from Cad-Ray and the experience was truly outstanding. From my initial enquiry, Nick was incredibly supportive and knowledgeable, answering all of my questions thoroughly and guiding me to the product that would best meet my needs. What really set this experience apart was his non-pushy approach. Nick showed genuine interest in understanding my specific requirements, ensuring that I would be fully satisfied with my choice. This type of customer service is rare and it made the whole process much more enjoyable. I can confidently recommend Cad-Ray to others not just for their high-quality products, but for their exceptional customer service. A big thank you to Nick and the entire Cad-Ray team for their professionalism and dedication.read less - 5/17/2023
Deryck Pham
best customer service on the planet. very easy to use. and always fine tuning to make the user experience better. - 6/16/2020
Jose Morales
Service is extremely quick and on point. Highly recommended to join the Cad Ray facebook group! - 6/01/2022
Thanh Huynh
I am beyond impressed with Destaney and Cad-Ray! Despite accidentally throwing away my old scanner, which I was supposed to return, their team went above and beyond to advocate for me. Their exceptional support and understanding turned a stressful si...read moreI am beyond impressed with Destaney and Cad-Ray! Despite accidentally throwing away my old scanner, which I was supposed to return, their team went above and beyond to advocate for me. Their exceptional support and understanding turned a stressful situation into a seamless experience. Highly recommend!read less - 8/02/2024
Lora Wonderly
Thank you Frank DeLuca for being so accessible and making everything right again! Customer service is above and beyond. We also love our Medit Scanner - we would be lost without it! - 1/25/2023
Ryan Buckwalter
Couldn't have had a better experience. The training was excellent, and they've been great to work with. I recently had an issue that required a warranty claim. The process was super easy, and completely hassle free. In fact, I'm still in shock at...read moreCouldn't have had a better experience. The training was excellent, and they've been great to work with. I recently had an issue that required a warranty claim. The process was super easy, and completely hassle free. In fact, I'm still in shock at how great they were about the whole thing. I would (and do) highly recommend this company.read less - 2/09/2021
Stephanie O'Rourke
I am fairly new to scanning with my Medit I700. I am loving this in my business. It has had its challenges at times but the best part is the accessibility and support from Frank DeLuca. He has been instrumental in helping me when I have a patient in...read moreI am fairly new to scanning with my Medit I700. I am loving this in my business. It has had its challenges at times but the best part is the accessibility and support from Frank DeLuca. He has been instrumental in helping me when I have a patient in the chair and need assistance. I couldn't be more grateful for his help. Thanks, Frank!read less - 12/16/2021
Jay Siddiqui
Amazing support and install, Jesse went through everything and made sure I was comfortable with my equipment before leaving. He also introduced me to the world of anodizing and now I am hooked! Highly recommend them for any tech you may need. - 8/23/2022
Cristy Duval
Kaila is an incredible Rep! Hope Cad-Ray knows what a great employee they have. Thank you Kaila! - 12/16/2021
Daniel Kim
CAD-Ray's online resources and customer support has made my Medit scanner implementation possible without the need for any hands on training. They are full of resources and have expert knowledge. - 7/01/2021
Tiffany Lee
This is a unique place because it serves both dentists and patients. For patients, this is an imaging center only. There are no diagnostics done here. There is a dentist on staff, but he is only there for imaging purposes, no diagnosis. As a dentist,...read moreThis is a unique place because it serves both dentists and patients. For patients, this is an imaging center only. There are no diagnostics done here. There is a dentist on staff, but he is only there for imaging purposes, no diagnosis. As a dentist, I would say that to be fair a niche place like this couldn't be expected to bill insurances. They would have to hire an entire separate staff to deal with all the thousands of types of insurances you have. For dentists: This is a great service to your patients because if you do not own a 3d x ray machine, you don't have to invest the $200,000.00, you can refer your patients here and cad ray will send you the digital files. You can also send them files to have custom surgical guides made. The folks who work here go out of their way to explain how things work. If you don't have a doctor, they can refer you to a dentist who can diagnose your problems. I always call ahead to make an appointment.read less - 6/02/2018
Jonathan Mason
I bought a Medit 3 years ago and have had amazing success with both the scanner and the support from Cad-Ray. My scanner recently broke and They were on the phone with my assistant trying to fix the problem, and when it was unfixable, they overnight...read moreI bought a Medit 3 years ago and have had amazing success with both the scanner and the support from Cad-Ray. My scanner recently broke and They were on the phone with my assistant trying to fix the problem, and when it was unfixable, they overnighted a new scanner and helped us set it up. Medit is now available through many dealers, but I would only buy next one from Cad-Ray.read less - 11/03/2022
Shant Aharonian
Cad-ray has to be the best company to work with when it comes to digital dentistry solutions. Here are the reasons why: 1. Experience. Everyone in the company has extensive experience in dentistry. They have used all digital platforms and offer custo...read moreCad-ray has to be the best company to work with when it comes to digital dentistry solutions. Here are the reasons why: 1. Experience. Everyone in the company has extensive experience in dentistry. They have used all digital platforms and offer customers first hand experience. 2. Honesty. Based on their experience they share all the good/bad of different systems. They work with you to find a solution that works best for you. Not sell you the piece of the equipment that gives them the biggest commission. 3. Support. Cad-ray offers the missing piece of the dentist/digital manufacturer puzzle. Many other distributors sell you a piece of equipment but don’t have true day-to-day experience with that equipment. Cad-ray’s team openly share their expertise to help customers optimize their workflows with great technology. 4. Passionate. The Cad-ray team is extremely passionate about their craft. They truly believe in what they have to offer. I took Armen Mirzayan’s course on intraoral scanning and it was truly mind blowing. Armen’s insights will help any dentist optimize their craft. I purchased the full sprintray 3d printing ecosystem the help of Frank. I plan to purchase more equipment from cad-ray. Also, Jesse is a genius in regards to all aspect of digital workflows. I’m truly grateful for this company and everyone who I’ve worked with so far.read less - 10/07/2022
Robert Loughlin
I Love it !!! I needed to replace my Omnicam because the computer hardware was old and not able to keep up with the software upgrades. The computer upgrade costs from Sirona were cost-prohibitive (another reason why the Medit is so good) and I wasn...read moreI Love it !!! I needed to replace my Omnicam because the computer hardware was old and not able to keep up with the software upgrades. The computer upgrade costs from Sirona were cost-prohibitive (another reason why the Medit is so good) and I wasn't about to make the same mistake twice and replace it with another system from Sirona. I was a bit unsure about making a big switch but after speaking with Nick Statly at Cad-Ray, he eliminated all of my reservations and I ordered it. I've used it for the past week and love it. Setting it up and getting it running was simple. I would not describe this as a do it yourself process, it's much easier. If you can make a cup of coffee you can set the scanner up and start making excellent scans. All one needs to do is watch the very well laid out and easy to follow videos and save a lot of money. The image quality and ease of use hands down beats the Omnicam. Also during the current pandemic, I really feel better about being able to cold sterlize the tips vs the omnicam's just "wiping down." I almost hope my desktop scanner craps out so I can get the Medit desktop. I'm glad I listened to you Nick!!!read less - 6/04/2020
I bought my Medit from Cad-Ray a little over a year ago. The very few times I've needed any kind of help with it, Cad-Ray has been absolutely ON IT. Issues get completely resolved within minutes. It's great!! - 11/01/2021
John Pobanz
We had an outstanding experience purchasing two Medit scanners. The delivery was timely . The onboarding clean. Laura was dazzling with her acumen and quick solutions . We highly recommend the investment in Cad Ray .Pobanz Orthodontics , Ogden Utah :...read moreWe had an outstanding experience purchasing two Medit scanners. The delivery was timely . The onboarding clean. Laura was dazzling with her acumen and quick solutions . We highly recommend the investment in Cad Ray .Pobanz Orthodontics , Ogden Utah :)read less - 12/10/2021
Delicate Dentistry
Cad-Ray's support is truly exceptional. While the equipment represents a significant investment, the peace of mind that comes from knowing they stand firmly behind their products is invaluable. Their support team is efficient, professional, and remar...read moreCad-Ray's support is truly exceptional. While the equipment represents a significant investment, the peace of mind that comes from knowing they stand firmly behind their products is invaluable. Their support team is efficient, professional, and remarkably persistent in ensuring everything runs smoothly. I'm especially grateful to Destaney and Laura for their ongoing assistance- their dedication and expertise have made a world of a difference!read less - 5/15/2025
Gregory Camfield
These guys are 1st in class service every time! - 7/08/2022
Asi Cohen
Armen Mirzayan's knowledge base sets CAD-RAY.COM apart from all other digital dental-equipment dealers. Not content with linking manufacturer support content, Armen's team provide instant feedback to any equipment queries, in-depth video tutorials, a...read moreArmen Mirzayan's knowledge base sets CAD-RAY.COM apart from all other digital dental-equipment dealers. Not content with linking manufacturer support content, Armen's team provide instant feedback to any equipment queries, in-depth video tutorials, and regular product testing, streamlining, and pushing the boundaries of their products - be it software, hardware, or connectivity between various brands. I highly recommend this team if you want to fully utilise your equipment and have the backup needed going forward!read less - 11/05/2019
Last year when I started looking into the Medit i500 I had my front desk call 3 sellers to get preliminary information. She told me hands down call CAD-RAY and don’t bother with the others. Boy was she right! Frank got us going with all our hardware ...read moreLast year when I started looking into the Medit i500 I had my front desk call 3 sellers to get preliminary information. She told me hands down call CAD-RAY and don’t bother with the others. Boy was she right! Frank got us going with all our hardware needs and trained us until all our questions were answered. Then Jonathon and Armen jumped in at our 2 day live training in Baltimore. I still review my notes to implement all the great ideas. When I get myself in a jam time to time CAD-RAY responds immediately and fixes my problem. Best decision I have made in the practice in a long time - Thank you everyone at CAD-RAY!read less - 10/09/2019
What can I say ! I have been extremely pleased with my scanner ! I recommend it to all my colleagues ! The support is the best , I bought the extended warranty and my scanner hada small crack and within one day they shipped my a new one ! I can’t wo...read moreWhat can I say ! I have been extremely pleased with my scanner ! I recommend it to all my colleagues ! The support is the best , I bought the extended warranty and my scanner hada small crack and within one day they shipped my a new one ! I can’t work without it ! Thank you !read less - 2/09/2022
Rosemary Toczydlowski
I had a phone call with Frank from support today, and he was awesome! Very helpful and knowledgeable. He sorted out all our issues no problem. Thank you Frank!! - 6/09/2021
Luciana Bretz-Pavie
Wayne Glassoff is the go-to guy here! The BEST!!! He is always on it, he helps figuring out exactly what you need, the best way possible. And fast! Great working with CAD-Ray, they have pretty much everything when it comes to digital dentistry. And t...read moreWayne Glassoff is the go-to guy here! The BEST!!! He is always on it, he helps figuring out exactly what you need, the best way possible. And fast! Great working with CAD-Ray, they have pretty much everything when it comes to digital dentistry. And they give you a damn good support too. Jessica Knott is awesome… training and support, just the BEST! Very satisfied customer here!read less - 2/05/2023
I bought a i500 almost a year and a half ago. Sadly it ran into an issue with the cord after over a years use. Cad-ray was extremely quick to diagnose the issue and also send a replacement scanner. The quality and ease of scanning has been great! Als...read moreI bought a i500 almost a year and a half ago. Sadly it ran into an issue with the cord after over a years use. Cad-ray was extremely quick to diagnose the issue and also send a replacement scanner. The quality and ease of scanning has been great! Also very happy with the customer service.read less - 6/02/2022
Aaron Olson
This product is the best out there. Do the math and your ROI makes more sense than most products we purchase as dentists. Get on the digital train or you’ll be left behind. This is the best product to make the jump with. - 6/16/2020
Had a training session for use of my Medit scanner this afternoon, and Heather G. was simply the best.....knowledgeable, patient and a great trainer. She had a wealth of knowledge regarding my scanner and she was so very patient with my computer glit...read moreHad a training session for use of my Medit scanner this afternoon, and Heather G. was simply the best.....knowledgeable, patient and a great trainer. She had a wealth of knowledge regarding my scanner and she was so very patient with my computer glitches! CAD-Ray is number one in my book! Thanks Heather, your time was much appreciated! Dr. Steve Hollisterread less - 5/14/2025
Mike Holt
We purchased the Medit i700. With the help of CAD-Ray and their amazing support team the transition to digital scanning was simple. Laura Geney walked us through the purchase and guided us during our training with the help of Andy Nova. Laura has bee...read moreWe purchased the Medit i700. With the help of CAD-Ray and their amazing support team the transition to digital scanning was simple. Laura Geney walked us through the purchase and guided us during our training with the help of Andy Nova. Laura has been there every step of the way checking in weekly answering all of our questions. We highly recommend CAD-Ray and look forward to doing business with them in the future.read less - 7/24/2022
Kirk Arritt (fldnstrm)
Whatever digital workflow addition you want to add to your dental practice look no further than Cad-Ray. Top notch support and training. - 1/29/2023
Logan Riggs
I always rely on Frank to help with any questions or concerns regarding our printer. The best in tampa. - 1/25/2023
Dr. Terry Zervos, DDS,PA.
Today I had to order new tips and Laura was EXTREMELY helpful, Cad-Ray has all the products you need for digital dentistry and they do Education, if you buy Medit scanner from them they include 12 CE training course. Cant just buy a Lamborghini you h...read moreToday I had to order new tips and Laura was EXTREMELY helpful, Cad-Ray has all the products you need for digital dentistry and they do Education, if you buy Medit scanner from them they include 12 CE training course. Cant just buy a Lamborghini you have to learn how to drive it!read less - 7/02/2020
Marc Prince
We’ve been using the Medit i700 in our office for approximately a year now. It has been a game changer and hard to remember what it’s like without using the intra-oral scanner. The Cad-Ray support team has been remarkable as well! - 9/11/2022
Reid Stone
I cannot say enough good things about Cad-Ray and the people involved with this organization. I have purchased equipment over the past few years from them and always been amazed at the non-pushy before the sale help and the after the sale support. ...read moreI cannot say enough good things about Cad-Ray and the people involved with this organization. I have purchased equipment over the past few years from them and always been amazed at the non-pushy before the sale help and the after the sale support. I have been deciding for the last 2 years to make a big purchase of a mill and sintering furnace and Jon has never made me feel like I was bothering him and never pushed me just to try to get a sale. It really is different from other sales experiences I've had with other companies/sales people.Jesse came out and installed and provided training for our new mill and sintering furnace. He went above and beyond what I was expecting to make sure myself and my team knew how everything works during the training. He has also been great with questions we have had since the installation. I just cannot say enough good things about my experience all around and will definitely be a Cad-Ray customer for many years to come. Thank you Cad-Ray!read less - 6/15/2022
Mark Evans
I’d like to tell you a story about CAD-Ray.com.
I ordered a VHF N4+ from CadRay. About two weeks after the order was placed, they called me up and said, “VHF just got an exclusive with “The Big Boys” so they are cutting ties with all the little ind...read moreI’d like to tell you a story about CAD-Ray.com.
I ordered a VHF N4+ from CadRay. About two weeks after the order was placed, they called me up and said, “VHF just got an exclusive with “The Big Boys” so they are cutting ties with all the little independent distributors. They just called us, and we just found out. What this means is that we won’t be able to provide you service after purchasing the VHF mill that you just bought.”
Now, they could have just left it at that. They could have said, “Sorry, it’s out of our hands.” They could have said, “We appreciate your business, but it’s not our fault.” They could have said, “That’s the way the cookie crumbles.”
But they didn’t.
Frank Weinstein calls me up and tells me that they want to make this right, so they are going to hook me up with a brand new Imes Coritec One+ for the same price as the VHF. The Coritec One+ is like the Mercedes of mills for in-office. This is the new model that just barely came out. It is a 5 axis mill. It does wet and dry milling. It does blocks and pucks. It mills all materials know to man, including Vibranium. It can also fly the space shuttle, and make all your wishes and dreams come true. It’s that good. It came with the laptop, Exocad, all the tools, and all the bells and whistles. It came fully loaded. It came white glove delivered to my office. It came with in office training. It came with the extra bur package. It came with everything and the kitchen sink.
So, I paid 36k for a mill, and because of something that was not Cad-Rays fault, they ended up giving me a 60k mill for the same price.
In the words of the great Tony Stark: “That’s how Dad did it. That’s how Cad-Ray does it. And it’s worked out pretty well so far.”
Thank you Frank Weinstein and Armen Mirzayan for having outstanding customer service and going the extra mile every time.read less - 4/02/2021
Collins Woodside
I purchased my Medit i500 scanner almost a year ago from CAD-Ray. Laura and the team there have been so responsive and ready to help. It is so nice to have a person answer the phone and be willing and able to assist! - 12/09/2021
JCarlos Mendoza
Had a good experience when purchasing my scanner, it was very easy, and to date after three months of using the scanner no support is a plus, anytime I call me I will answer and troubleshoot - 7/10/2022
Office NHFD
Frank DeLuca was very helpful even though i didn't buy Medit from Cad ray ! Had an issue and my original dealer was not helpful and i contacted Cad ray thinking it was direct Medit. Frank was extremely nice to log in and do what ever he could until ...read moreFrank DeLuca was very helpful even though i didn't buy Medit from Cad ray ! Had an issue and my original dealer was not helpful and i contacted Cad ray thinking it was direct Medit. Frank was extremely nice to log in and do what ever he could until Medit could take over. would give 7 stars if available.read less - 8/10/2022
Aram Grigoryan
I'm really grateful with the service CAD-Ray has provided! I'm also very happy with Laura's presentation with the Medit i700, and overall help in choosing the right scanner for my practice. I'm really happy with the scanner and the SprintRay Pro 95 P...read moreI'm really grateful with the service CAD-Ray has provided! I'm also very happy with Laura's presentation with the Medit i700, and overall help in choosing the right scanner for my practice. I'm really happy with the scanner and the SprintRay Pro 95 Printer as well. Thank you.read less - 8/31/2021
