In this video – we show the workflow of the new Shining3D Elite device, which incorporates 2 devices in 1, an IOS + the first ever intraoral photogrammetry unit – to scan coded horizontal scan dominoes. This video shows the workflow – which does the stitching of the IOS model to the implant position ALL AUTOMATICALLY in the shining software – sending the designer a quick and easy file, rather than having to merge the 2 data sets from 2 different devices manually like in this example here with ICAM.
Hand Articulate Upper and Lower Jaw Models in Digital Manner with CAD-Ray Software Powered by exocad
There are may advanced ways that you can articulate the maxilla with the mandible if you happen to have models that are not accompanied by a bite registration or the...
Bite Alignment Scan to the Rescue in exocad
Once in a while, our users get themselves in a bind and you have to rely on manual alignment of jaws to each other. Sometimes, it feels like you are...
How to Scan an Edentulous Arch in 90 Seconds with the Medit i500 Intra-Oral Scanner
Don’t be mislead; it is much easier to scan the upper edentulous jaw than the lower, as you don’t have to deal with the tongue or saliva. With the Medit...
Upper First Molar Restored with Medit i500, exocad, emax, and VHF Z4 Milling Machine
In this particular case, we demonstrate an emax restoration fabricated with the Z4 milling machine by VHF. In the first video, you can see how the case was set up...
Milling Screw Access Hole and emax Abutment with Z4
The Z4 Milling Machine can drill emax, zirconia and metal abutments. You can use a scanbody, identify the location of the fixture, design the abutment and mill our either ceramic...