Arlington Heights Orthodontics & Pediatric Dentistry
Travis Kendall
Great experience purchasing my Medit through them. Always there if I have questions too. Thanks again! - 6/16/2020
arthur lyford
Eric Bailey
Chad Gardner, DDS
Mostafa Koperly
Mark Geddes
Michael Pagano
Robert Loughlin
vy pham
Kallen Wheeler
Jason Oh
dr sheth
Levy Do
Mary Oliverie
Thomas Lim
Jared Gustafson
Scott Terry
Alderman Dental
Mayoor Patel
Cad-Ray is great! Great customer service and they are consistent with their followthrough . Always helpful when you need questions answered and helping to lower the learning curve with newly purchased equipment. I’m very satisfied with my medit i-... read moreCad-Ray is great! Great customer service and they are consistent with their followthrough . Always helpful when you need questions answered and helping to lower the learning curve with newly purchased equipment. I’m very satisfied with my medit i-500 intraoral scanner. Armen and Frank are solid! read less - 6/16/2020
jeremiah choi
AMISH DESAI
Tony Cascino
Dong Lim
Al Villalobos
robert delaney
Kayla Dobmeier
David Paquette
Obdulia Rondon
Reid Stone
Evan Bedell
Shahnam Shifteh
Dath Collins D.D.S.
Scott Chong
John Pisacane
Greg Stepka
I have been very happy with the Medit I purchased from Cad Ray. Everyone has been very helpful and quick to respond to my questions. They have an awesome video library for the medit, I am new to scanning and have really enjoyed the tutorial videos. - 6/16/2020
Yoav Taub
Kirk Arritt (fldnstrm)
David Forrest
Great service even if you own a Primescan. Company is built on customer service. Thanks for the help guys…. - 1/05/2022
Jacob Masters
Jonathan Mason
Jim Ellis
Aaron Olson
Scot Bruce
Frank Gibbons
Kurt Adamson
Time Stamps:
This video is sped up at some points, but from the time the design was finished and it was sent to production, it tool less than 90 seconds for the milling machine to start milling. It took a total of 9 minutes and 20 seconds from the time the first water is sprayed to the time the water stops.
The milling machine is delivered, installed, and serviced by our partners at Talladium, Inc.
Includes CAD-Ray’s Chairside Computer Aided Design Software, powered by exocad for 1 year ($4500 Value) for designing inlays, onlays, crowns, 3unit bridges.
$1150 yearly cost for exocad DentalCAD base module (you can cancel at any time)
Additional modules such as implant designs, implant planning, bite splints, dentures, etc… available for purchase through CAD-Ray.com
Includes CAM (Compute Aided Manufacturing) Software for Nesting and Machine Tool Operation. This means you can design your own restoration outside of exocad and still be able to mill them.
2 years/2,000 hours warranty , which ever comes first
Talladium will manage delivery and maintanance
$300 for freight in continental USA
The following two videos showcase a demonstration by VHF at the Greater New York Meeting in 2018. The software from VHF comes with a DentalCAM part and a DentalCNC app. You can nest your restoration in exocad and integrate with the milling machine, or you can nest and mill directly with the VHF software.
The VHF Z4 milling machine comes with an on-board computer. This video shows how we have remote desktop ed into the Z4 to launch the software for nesting and milling.
The biggest advantage of nesting with VHF and milling is that they happen simultaneously. If you nest in exocad, the math has to be done in that software and then transferred to the milling machine, but if you do it all in VHF, the milling process starts before the nesting algorithm is finished.
[videojs_video url=”https://cad-ray-dev.developerpad.com/wp-content/uploads/2018/10/design-scanbody-for-abutment-mill-z4.mp4″]
Watch the sample video from our tutorial library for our users.
Click the image to download the MasterMill CAM Software where you can nest any stl file and then send it to the milling machine.
The Z4 has 3 burs its uses, a 2.4 mm diameter bur, a 1.0 mm diameter bur and one at 0.6mm, making it the smallest tip available for milling the intaglio of a restoration.
You must log in to post a comment.